New 12W 2400MHz QO-100 Amplifier
The new amplifier from DXpatrol to QO-100 2400Mhz 12W
Base on the new BLP9G0722-20G we present this new simple amplifier That will make easy to set a QO-100 satellite station
The amp is in a conservative output power of 12W, but 20W is possible to achieve without any modification.
The amplifier gain is about 25dB, so the drive optimum is ~ 50mW to 100mW
Power output 50mW in for 12W ( 100mW for 20W out)
The Voltage is 28V DC and will drain up to 2A
Amp external dimensions : 97mm X 62mm X 26mm The 4 holes on sides are M3
#########################################################################
2400MHz QO-100 Amplifier
Now with Rugged Aluminium Box,
VOX PTT and PWR/SWR readings !
- LDMos , rugged amplifier with aluminium box
- NXP MHT1008NT1 RF amplifier
- Designed for DXpatrol Upconverter as driver.
- Input > 70mW
- Output 12W* (5W if 12V supply)
- Voltage 28V ( 12V to 28V stepUP converter included)
- Bias current 600mA
- Max current 1,5A
- TX-Ground PTT
- Vox PTT
- SMA connectors
- Feed Trough capacitors
- SWR and POWER meter indication.
- SWR- Input 1:1.3 @ 50 Ohms
- Max VSWR output – 5:1
- Operating Temperature- 40ºC to 80ºC Max Temperature- 150ºC
- LDMOS- MHT1008NT1
- Driver- RF2126
- PWR meter DC 0V to 4V ( full power )
- SWR meter DC 1.5V@ SWR 1:1 /~/ 4V @ SWR Ꝏ

StepUP 150W 12V to 28V converter included
Related products
UpConverter MK4 for QO-100
140,00 €Add to cart• Full lockable into a internal TCXO 10 Mhz reference or a external GPSDO • TX /Standby function with RF VOX • Extreme accuracy and precision transmission frequency. • Local Oscillator has 4 factory pre-programmed frequencies for 4 IF usages. (see table) • Easy selection by dip switch ( s1) on board. • Clean and …
DX-Patrol LNB
25,00 €Add to cartLNB DX-Patrol, ready modified for QO-100 Reception LO- 25Mhz V or H polarization Suitable on our Helix Antenna. ( This LNB needs a LO injection. Will NOT work by itself alone)
DXPATROL FULL DUPLEX QO-100 GROUNDSTATION 2.0
950,00 €Add to cartNew QO-100 Full Duplex Groundstation V.2.0
An all-in-a-box station
for easy satellite operation
( LNB & GPS antenna included)GS-FD-Manuel FR.
( Manuel en Français- Merci F1RXP )HERE GS-FD Manual ( english version )
Groundstation firmware_1.0.17
(DO NOT INSTALL ON 2.0 Versions)