DXPATROL FULL DUPLEX QO-100 GROUNDSTATION 2.0

  Features:

NEW Full Duplex Groundstation V2.0  from DXPatrol
This new model improved by Luis, CT1DMK.
Luis redesigned our Loop Filter with new architecture PLL so we manage to reduce the lock delay
for only 1 minute. ( version V.2.0 and after only)

          • Reception frequency: 10489.500 to 10490.000MHz;

          • Transmission Frequency: 2400.000 to 2400.500 MHz;

• IF  TX and RX Frequency: 28,500 to 29,000 / 50,500 to 51,000/ 70,000 to 70,500/ 144,500 to 145,000/ 432,500 to 433,000/ 1296,500 to 1297,000 Mhz;
• GPS Lock internal 10MHz reference;
• Lock to GPS and OCXO delay to 1 minute fully operational. ( version 2.0 only)
• Transverter stage output up to 100mW;
• Maximum Output RF Power 10 W @2.4 GHz based on NXP MHR1008NT1; ( BLP9G0722-20g in V2.0 )
• Factory set input power 500 mW for VOX operation;
• Maximum input RF 5W (1W optimum drive);
• Auto TX and RX by VOX PTT ( optional PTT RCA connector on back panel) 
• External 10Mhz reference Output.
• Supply voltage 12V to 14V;
• Thermal alarm > 60º C;
• SWR protection and alarm> 1:3;
• High voltage input alarm;
• Power output bar and Watt indication;
• SWR bar and ratio indication;
• Current consumption indication and alarm
• Internal 5A fuse protection;
• LNB Phantom Power PTC protection (bias-T) 
• NMEA GPS indication;
• Number of GPS satellites in range;
• GPS coordinates;
• QTH Locator presentation on screen;
• UTC clock and date;
• Wireless Firmware upgrade
• New fan cooling
• External RX-gain adjustment
• External Vox-delay adjustment
• Optional Morse code instructions for Blind operators.